E3D
E3D Revo™ CR 24V Single Nozzle Kit
Regular price
$148.00 SGD
Regular price
Sale price
$148.00 SGD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Upgrade your Creality 3D printer to Revo™ so you can change nozzles cold without special tools and hot tightening hassles.
No extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.
No firmware tweaks: Kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.
Includes solderless, crimpless, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle
Detailed upgrade guides created by E3D to help you get 3D printing quickly
Creality mounting holes. Convenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!
Easy nozzle swaps. A variety of Revo™ Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo™ Nozzle can be changed by hand. No tools, no hot tightening.
Simple, hassle-free connection. Solderless, crimpless, butt splice connectors included for easy connection to get up and running quickly, without having to undo the entire wiring bundle.
Better reliability. factory sealed nozzles, so there’s much less chance of nozzle leaks, and no hot tightening needed.
Better efficiency. Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: an 100K NTC thermistor is integrated into this special HeaterCore, which has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the HeaterCore, Revo™ CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.
Revo™ CR is directly compatible with the following Creality 3D printers:
Ender 3
Ender 3 Pro
Ender 3 V2
Ender 5 Pro
Ender 5 CR10
Ender 5 Plus
Ender 6
CR10S
CR10S4
CR10S5
Kit contents:
Collet
Collet clip
Heat sink
Spring
HeaterCore
Nozzle and HeaterCore sock
Revo™ Nozzle
NOTE:
- SOLD AS A KIT & REQUIRES ASSEMBLY.
- Revo™ CR can be used with other Creality printers using the NTC thermistor, however you may need to make modifications to the mount and/or Z sensor.
- You may need to adjust the Z height when changing nozzles.
- Available in 24V and as a single nozzle kit (0.4mm). We also carry Revo™ nozzles in other sizes, chat to enquire.
No extra mounts or adapters needed: Pre-drilled M3 clearance holes match Creality’s X carriage mounting pattern for easy installation.
No firmware tweaks: Kit includes a special Revo HeaterCore with a 100K NTC thermistor, which has the same response as the stock Creality thermistor.
Includes solderless, crimpless, butt splice connectors for easy connection. Wire the HeaterCore into your Creality 3D printer without undoing your entire cable bundle
Detailed upgrade guides created by E3D to help you get 3D printing quickly
Creality mounting holes. Convenient M3 clearance holes correspond to Creality’s X carriage mounting pattern, so you can get up and running quickly without extra mounts or adaptors. Just reuse the existing M3 bolts!
Easy nozzle swaps. A variety of Revo™ Nozzles enhance the capabilities of your 3D printer without a difficult nozzle changing processes. Every Revo™ Nozzle can be changed by hand. No tools, no hot tightening.
Simple, hassle-free connection. Solderless, crimpless, butt splice connectors included for easy connection to get up and running quickly, without having to undo the entire wiring bundle.
Better reliability. factory sealed nozzles, so there’s much less chance of nozzle leaks, and no hot tightening needed.
Better efficiency. Revo HeaterCore makes your 3D printer heat up faster and more efficiently than the stock HotEnd. Start 3D printing right away without annoying firmware adjustments: an 100K NTC thermistor is integrated into this special HeaterCore, which has the same response as the stock HotEnd, so no firmware tweaks are needed. Better safety. Thanks to built-in PTC behaviour of the HeaterCore, Revo™ CR will add an extra failsafe against thermal runaways to your Creality 3D printer – providing an extra layer of protection if thermal runaway protection is disabled in firmware.
Revo™ CR is directly compatible with the following Creality 3D printers:
Ender 3
Ender 3 Pro
Ender 3 V2
Ender 5 Pro
Ender 5 CR10
Ender 5 Plus
Ender 6
CR10S
CR10S4
CR10S5
Kit contents:
Collet
Collet clip
Heat sink
Spring
HeaterCore
Nozzle and HeaterCore sock
Revo™ Nozzle
NOTE:
- SOLD AS A KIT & REQUIRES ASSEMBLY.
- Revo™ CR can be used with other Creality printers using the NTC thermistor, however you may need to make modifications to the mount and/or Z sensor.
- You may need to adjust the Z height when changing nozzles.
- Available in 24V and as a single nozzle kit (0.4mm). We also carry Revo™ nozzles in other sizes, chat to enquire.
