Fillamentum
PETG "Vertigo Grey"
Regular price
$40.00 SGD
Regular price
Sale price
$40.00 SGD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
Filament made of polyethylene terephthalate glycol (PETG) is widely used for 3D printing thanks to its specific properties and easy processing. PETG is an ideal material for prints with practical applications.
Features:
- Low warping and shrinkage
- Great layer adhesion
- High strength & good hardness
- Flexural resistance
- Temperature resistance up to 70 °C
- Low fumes released
- Chemical resistance against water, acids, alkalis, and alcohols
- Transparency and gloss
- Safe to use in electrical and electronic equipment
- Recyclable & BPA-free & styrene-free
Working temperature: | 235–255 °C |
Heated bed: | 65–75 °C |
Diameter: | 1.75 mm |
Diameter tolerance: | +/- 0.05 mm |
Weight: |
750 g of filament (+ 210 g spool)
|
The length of the filament: |
240 m (1.75 mm, 750 g)
|
RAL | Pantone | HEX: |
N/A | N/A | N/A
|
Comparison of our copolyester filaments:
CPE CF112 Carbon | CPE HG100 | PETG | PETG filaments* | |
Impact resistance | 106 kJ/m2 (unnotched) |
no break (notched) |
85 J/m (notched) |
98–126 J/m (notched) |
Tensile strength | 52 MPa | 48 MPa | 50 MPa | 26–45 MPa |
Elongation at break | 8 % | 150 % | 120 % | 58–110 % |
Hardness | 94 R-Scale | 115 R-Scale | 105 R-Scale | 108 R-Scale |
Flexural strength | / | 71 MPa | 71 MPa | 54–74 MPa |
Flexural modulus | / | 1860 MPa | 2150 MPa | 1600–2100 MPa |
Wear resistance | ★★★★ | ★★ | ★ | ★ |
Creep resistance | ★★★★ | ★★ | ★ | ★ |
Heat resistance (HDT) | up to 100 °C | 80 °C | 70 °C | 70 °C |
Chemical resistance to acids, bases, hydrocarbons |
good | good | poor | poor |
*PUBLICLY ACCESSIBLE INFORMATION FROM OTHER PRODUCERS





